Print Options

Card layout: ?

← Back to notecard set|Easy Notecards home page

Instructions for Side by Side Printing
  1. Print the notecards
  2. Fold each page in half along the solid vertical line
  3. Cut out the notecards by cutting along each horizontal dotted line
  4. Optional: Glue, tape or staple the ends of each notecard together
  1. Verify Front of pages is selected for Viewing and print the front of the notecards
  2. Select Back of pages for Viewing and print the back of the notecards
    NOTE: Since the back of the pages are printed in reverse order (last page is printed first), keep the pages in the same order as they were after Step 1. Also, be sure to feed the pages in the same direction as you did in Step 1.
  3. Cut out the notecards by cutting along each horizontal and vertical dotted line
To print: Ctrl+PPrint as a list

10 notecards = 3 pages (4 cards per page)

Viewing:

Chapter 9 Book Questions

front 1

Which of the following is not necessary for x-rays to be produced?

a source of electrons

rapid particle acceleration

a source of protons

instantaneous deceleration

back 1

a source of protons

front 2

For pair production to occur, the energy of the incoming x-ray photon must be at least:

back 2

1.02 MeV

front 3

The interaction of x-rays with matter that constitutes the greatest hazard to patients in diagnostic radiography is:

back 3

photoelectric interaction

front 4

The unit used to measure the amount of energy absorbed in any medium is the:

back 4

radiation absorbed dose (rad)

front 5

The maximum accumulated whole-body dose for a 35-year-old occupational worker is:

back 5

35 rem

front 6

According to the law of Bergonie and Tribondeau, the characteristics that determine the sensitivity of a cell to radiation are:

back 6

mitotic activity and structure and function of the cell.

front 7

The intensity of radiation from a radiographic tube was 35 mR at a distance of 2.5 m from the tube. What would the intensity be at a distance of 4 m from the tub, all other factors remaining the same?

back 7

14mR

front 8

Which of the following is not a component of an optically stimulated luminescence (OSL) dosimeter?

exposure meter

plastic blister pack

aluminum oxide strip

metal fibers

back 8

exposure meter

front 9

An exposure of 2 Sv is received. How many rem is this equivalent to?

back 9

400 rem

Book shows 1 Sv +100 rem

front 10

Lead absorbs x-rays through the process of ________.

back 10

the Compton effect.