Print Options

Card layout: ?

← Back to notecard set|Easy Notecards home page

Instructions for Side by Side Printing
  1. Print the notecards
  2. Fold each page in half along the solid vertical line
  3. Cut out the notecards by cutting along each horizontal dotted line
  4. Optional: Glue, tape or staple the ends of each notecard together
  1. Verify Front of pages is selected for Viewing and print the front of the notecards
  2. Select Back of pages for Viewing and print the back of the notecards
    NOTE: Since the back of the pages are printed in reverse order (last page is printed first), keep the pages in the same order as they were after Step 1. Also, be sure to feed the pages in the same direction as you did in Step 1.
  3. Cut out the notecards by cutting along each horizontal and vertical dotted line
To print: Ctrl+PPrint as a list

57 notecards = 15 pages (4 cards per page)

Viewing:

Chapter 8 Surgical Tech

front 1

Hemostasis

back 1

Localized collection of extravasated blood that is often clotted

front 2

When does the body use the process of coagulation

back 2

to achieve hemostasis. As soon as a vessel is injured, a period of vasoconstriction begins, in which the muscular walls of the vessel constrict to help slow the flow of blood.

front 3

What happens after vasoconstriction

back 3

platelets begin to adhere to the sides of the injured vessel walls, clumping together to form a plug at the cut end of the injured vessel. Once the platelets adhere to the vessel walls, they begin to release their contents, including epinephrine, serotonin, and, most important, adenosine diphosphate (ADP)

front 4

What does the release of ADP cause?

back 4

more platelets to clump on the first layer, resulting in an initial thrombus.

front 5

Hemophilla

back 5

is the most common of these and manifests itself as a clotting deficiency. Preoperative testing is useful in determining whether these conditions exist.

front 6

What do drug therapy cause in OR patients

back 6

platelet dysfunctions also affect hemostasis in the OR. Patients may be requested not to take aspirin for 1 week prior to surgery because of its anticoagulant properties.

front 7

Mechanical Methods

back 7

hemostasis can be achieved with the use of several types of devices to control bleeding until a clot forms.

front 8

Clamps

back 8

are used to compresscompressTo apply pressure compress To apply pressure the walls of vessels and to grasp tissue. Most commonly used is the hemostathemostatA device or agent used as a coagulant hemostat A device or agent used as a coagulant that is available with either straight or curved jaws.

front 9

Ligature

back 9

or ties (referred to as “stick ties” when a needle is attached), are strands of suture material used to tie off blood vessels. are made of either natural or synthetic material and are designed either to dissolve over a period of time or to remain in the body tissue permanently

front 10

Clips

back 10

are often used in place of suture ligatures when many small vessels need to be ligated in a short period of time. are made of a nonreactive metal, such as titanium or stainless steel, or plastic material and come in various sizes as well as absorbable or permanent varieties. They are applied either from a manually loaded applicator or from any of several preloaded disposable applicators.

front 11

Sponges

back 11

are used to apply pressure on bleeding areas or vessels and to absorb excess blood or body fluids

front 12

Sponges (Raytec)

back 12

also called 4 × 4’s (the size of the sponge)

front 13

Sponges (Laparotomy Sponges)

back 13

also referred to as lap sponges or “tape” sponges due to the radiopaque strand or tape that hangs from the sponge.

front 14

Sponges (Tonsil)

back 14

round sponges

front 15

Sponges (Patties)

back 15

(cottonoids) are smaller compressed radiopaque sponges used for neurosurgical procedures.

front 16

Sponges (Kitners)

back 16

and peanuts, also referred to as dissecting sponges, which consist of small pieces of tightly rolled gauze

front 17

Pledgets

back 17

When bleeding occurs through needle holes in vessel anastomosis, small squares of Teflon® are used as buttresses over the suture line. Using suture, these are sewn over the hole in the vessel and exert outside pressure over the small needle holes to prevent bleeding and promote clotting. These are often used in peripheral vascular and cardiovascular surgery.

front 18

Bone Wax

back 18

made of refined and sterilized beeswax, is used on cut edges of bone as a mechanical barrier to seal off oozing blood

front 19

Suction

back 19

The act of sucking up air or fluids through a device, such as a tonsil suction tip

is the intraoperative aspiration of blood and body fluids by mechanical means to keep the surgical site clear. Several different styles are available for different types of procedures, and most are disposable. It is important that it is always available during surgery and until the patient has left the room, It is also vitally important that anesthesia personnel have suction available for them at the beginning and end of every surgical procedure when the patient is intubated and extubated.

front 20

Drains

back 20

are used postoperatively to remove blood and body fluids from the operative site to prevent edema and hematoma formation, and aid in removing air in order to prevent dead spaces within the surgical wound.

front 21

Pressure Device

back 21

as with the use of a tourniquet, occludes the flow of blood until a clot has time to form. Prophylactically, pressure devices, such as sequential stockings, may also be used to prevent venous stasis and deep venous thrombosis.

front 22

Tourniquets

back 22

are often used on extremities to keep the operative site free of blood. The provision of a bloodless field makes visualization easier and reduces the operative time. Bleeding must be controlled prior to removal , however, because the use alone does not achieve hemostasis

front 23

Thermal Hemostasis

back 23

One of the most common means of obtaining hemostasis during a surgical procedure is with the use of heat. Several different types of devices are available for achieving

front 24

Electrosurgery

back 24

is the most commonly used thermal hemostatic device. The components are the active electrode or Bovie pencil, electrosurgical or generator unit (ESU), and inactive or dispersive electrode, also called the grounding pad

front 25

Lasers

back 25

provides an intense and concentrated beam of light that is able to cut and coagulate tissue at the same time with very little surrounding tissue destruction.

front 26

Argon Plasma Coagulation

back 26

involves the use of argon gas in combination with monopolar electrical energy in the form of a noncontact, white light beam. The argon beam coagulator provides rapid hemostasis that travels from a generator to a pencil-like hand-piece. There is little to no tissue adherence since the handpiece does not come in direct contact with the tissue that is bleeding. There is less charring of the tissue compared to the ESU.

front 27

Ultrasonic (Harmonic) Scalpel

back 27

consists of a single-use titanium blade attached to a handpiece and a portable generator. The generator converts the electrical energy into mechanical energy, thus causing the blade to move by rapid ultrasonic motion that simultaneously cuts and coagulates tissue.

front 28

Pharmacological Agents

back 28

  • Absorbable gelatin (Gelfoam®)
  • Collagen (Avitene®)
  • Oxidized cellulose (Nu-Knit®; Surgi-Cel®)
  • Silver nitrate
  • Epinephrine
  • Thrombin

front 29

Blood Loss

back 29

is monitored by several means intraoperatively to aid the surgeon and anesthesia provider in making decisions regarding the patient’s status and potential need for transfusion or autotransfusion. is charted by the circulator and reported to the surgeon upon request or immediately in extreme-loss situations.

front 30

Calibrated suction devices (canisters)

back 30

are used between the suction tubing and the vacuum source to collect and monitor the amount of blood and body fluids suctioned from the field. The surgical technologist should keep close track of the amount of irrigation fluids used; the amount of irrigation fluid used is subtracted from the total volume of fluid in the canister to give a more accurate measurement of blood loss.

front 31

What does the circulator do to keep track of blood loss?

back 31

may weigh sponges removed from the field to provide an estimate of blood. may use a scale and a predetermined sponge weight formula; alternatively, some hospitals have a bloody-sponge weight estimate that is used and multiplied by the number of sponges removed from the field.

front 32

How must bloody sponges be weighed?

back 32

The sponges must be weighed wet as the formula is based on the dry and wet weights of the sponges. This is not an exact method but provides the surgeon and anesthesia provider with a fairly reliable estimate of blood loss.

front 33

Blood Replacement

back 33

involves the administration of whole blood or blood components such as plasma, packed red blood cells, or platelets via an intravenous (IV) line. This is used to increase the circulating blood volume, to increase the number of red blood cells, and to provide plasma-clotting factors.

front 34

homologous

back 34

From the same species

front 35

Autologous

back 35

From oneself

front 36

Autotransfusion

back 36

is the use of the patient’s own blood, which has been processed for reinfusion.

front 37

What is important when using homologous banks

back 37

blood typing and cross-matching are essential to prevent transfusion reactions.

front 38

Four Main blood Types

back 38

A, B, O, and AB

Due to these factors, blood is carefully typed and cross-matched prior to being administered.

front 39

Rh (Rhesus) factor

back 39

Genetically determined blood group antigen that is present on the surface of erythrocytes of some individuals; if the antigen is present the individual is Rh1 (positive) and if absent Rh– (negative)

If blood given to an Rh-negative individual is Rh positive, hemolysishemolysisThe destruction of erythrocytes hemolysis The destruction of erythrocytes occurs, leading to anemia

front 40

Handling of Blood Replacement Components

back 40

If the products are not to be used immediately, they should be stored in a refrigerator at a temperature between 1° and 6°C (33.8°–42.8°F).

Two individuals should perform this identification; individuals who can perform the identification are the surgical technologist, registered nurse, surgeon, and anesthesia provider.

front 41

Autotransfusion

back 41

In addition to suctioned blood, blood may be drained from bloody sponges into a basin of saline, and then aspirated into the autotransfusion machine.

Cell Saver

front 42

Hemolytic Transfusion Reactions

back 42

If blood is not properly matched including Rh factor prior to transfusion, a hemolytic transfusion reaction may develop. This may result from Rh incompatibility from mismatched blood transfusions. Severe hemolytic reactions can be fatal and must be treated immediately.

front 43

Symptoms of Hemolytic Reactions

back 43

conscious patient may exhibit fatigue and complain of lack of energy. The patient may experience rapid pulse, shortness of breath, and pounding of the heart. The skin may appear jaundiced and pallor may be exhibited, especially in the palms of the hands.

front 44

Prior to Surgery indicators to watch for

back 44

  • Difficulty breathing
  • Chest pain
  • Changes in skin color
  • Changes in vital signs
  • Open bleeding wounds or visible punctures not indicated on the patient’s chart
  • Inability to move an extremity
  • Misshapen/misaligned body part
  • Disorientation or confusion

front 45

Following these first two priorities, treatment is provided for the following:

back 45

  • Chest injuries
  • Shock
  • Wound protection/closure
  • Fractures
  • Vital sign monitoring
  • Provision of reassurance and comfort for the patient

front 46

A chain-of-survival

back 46

concept applied to both in-hospital and out-of-hospital arrests addresses the ABCs—airway, breathing, and circulation—as well as providing the “D,” definitive treatment. Successful resuscitation requires:

front 47

The new concept of “push hard, push fast”

back 47

is to be applied to CPR. The recommendation is at least 100 compressions per minute. The depth of compression for adults has changed from a depth of 1½ inches to 2 inches to a consistent depth of 2 inches

front 48

In the surgical setting, the “D” of the C-A-Bs of cardiac arrest What is a surg tech role?

back 48

in this situation is to protect the sterile field from contamination during the resuscitation efforts. In some cases, the surgical technologist may be required to assist by providing artificial respiration (“bagging the patient”) or providing chest compressions.

front 49

Disseminated intravascular coagulation (DIC)

back 49

is a pathological process in the body that occurs when blood begins to coagulate within the body. The body’s blood clotting mechanisms are activated throughout the body instead of being localized to a specific area of injury. may result in clotting symptoms or, more often, in bleeding due to the depletion of the body’s blood clotting mechanisms

front 50

Factors that may stimulate DIC

back 50

  • Infection of the blood by bacteria or fungus
  • Severe tissue trauma, e.g., head injury, shock, or burns
  • Leukemia or cancer
  • Severe liver disease
  • Recent blood transfusion reactions
  • Obstetric complications

front 51

One important symptom of Anaphylactic reactions

back 51

. Hives or urticaria may be present on the skin with severe itching.

front 52

During the anaphylactic reaction what must the surgical team maintain

back 52

the airway and provide supplemental oxygen or the patient may die of respiratory failure. The symptoms of vascular collapse and shock must also be treated to prevent death from cardiovascular failure.

front 53

Epinephrine

back 53

is the first-line drug in the treatment of a severe anaphylactic reaction.causes bronchodilation, reduces laryngeal spasm, and raises blood pressure.

front 54

all-hazards preparation

back 54

is an all-encompassing term that refers to the many different emergencies

front 55

Emergencies

back 55

are defined as those that require the emergency response of outside assistance, which may be at the local, county, state, or federal levels.

front 56

the term “all-hazards preparation” is used

back 56

provides a template for generalized training and emergency preparation that can be applied to all disaster situations rather than training that is focused on a limited number of local or regional types of emergencies.

front 57

What is the most common type of disaster?

back 57

Natural disasters