Print Options

Card layout: ?

← Back to notecard set|Easy Notecards home page

Instructions for Side by Side Printing
  1. Print the notecards
  2. Fold each page in half along the solid vertical line
  3. Cut out the notecards by cutting along each horizontal dotted line
  4. Optional: Glue, tape or staple the ends of each notecard together
  1. Verify Front of pages is selected for Viewing and print the front of the notecards
  2. Select Back of pages for Viewing and print the back of the notecards
    NOTE: Since the back of the pages are printed in reverse order (last page is printed first), keep the pages in the same order as they were after Step 1. Also, be sure to feed the pages in the same direction as you did in Step 1.
  3. Cut out the notecards by cutting along each horizontal and vertical dotted line
To print: Ctrl+PPrint as a list

15 notecards = 4 pages (4 cards per page)

Viewing:

IAHCSMM Chapter 11

front 1

True

back 1

Microgrind, or Supercut Scissors are usually identified with a black handle.

front 2

False

back 2

Stainless steel jaw needleholders last longer than Tungsten Carbide jaw needleholders.

front 3

True

back 3

The place where the two parts of a ring handled instrument meet and pivot is called the box lock.

front 4

False

back 4

Instruments are heat treated to give their surface a mirror (shiny) finish.

front 5

True

back 5

Tissue forceps have teeth.

front 6

True

back 6

During instrument manufacture the process of passivation helps build a protective a protective chromium oxide layer on each instrument's surface.

front 7

False

back 7

The part of a hemostat that locks and holds it in position is called the box lock.

front 8

False

back 8

Laser-finished instruments are coated with a durable protective finish that cannot be chipped or scratched.

front 9

False

back 9

When assembling an instrument set, heavier instruments should be placed on top of lighter ones to hold them in place.

front 10

True

back 10

After applying instrument identification tape, instruments should be autoclaved to help the tape bond to the instrument.

front 11

1 to 1.5

back 11

Instrument marking tape should be wrapped approximately _ __ ___ around the instrument.

front 12

etching

back 12

Which of the following is NOT an acceptable form of instrument marking?

front 13

Unclog the suction during surgery

back 13

The purpose of a suction stylet is to:

front 14

Rubber testing material

back 14

Kerrison Laminectomy Rongeurs should be tested using::

front 15

Gold handles

back 15

Scissors with tungsten carbide cutting edges are usually identified by: