27 notecards = 7 pages (4 cards per page)
1 1/2 Dimensional Array
a linear, curvilinear, or phased array in which some elevational focus and beam forming is done electronically. In conventional arrays the elevational focusing is done only with a lens. By providing a limited degree of electronic focusing elevationally, the slice thickness can be made smaller over an extended range. The term 1 1/2 D refers to the fact that whereas an array usually has over 128 elements laterally, it may have only 5 or so elements in the elevational plane.
a way to remember that when the output of a scanner increases (decreases) by 3 decibels, the power and the intensity doubles (halves). If the power is 20 mW and the sonographer reduces it by 9 dB (three 3-dB increments) repeated application of the 3-dB rule tells you the the reduced power is
conversion of acoustical energy into heat. Absorption is on mechanism leading to ultrasound beam attenuation in tissue
the speed of sound in a medium multiplied by its density. Part of the energy of an ultrasound beam is reflected at interfaces between materials that have unequal acoustical impedances
quantity describing the rate at which acoustical energy is emitted by the ultrasound transducer of an ultrasound instrument.
acoustical pressure amplitude
the maximum cycle-to-cycle increase (or decrease) in the pressure due to a sound wave, relative to the background pressure
the area of an array transducer that is actively transmitting or receiving; the active aperture is determined by whichever elements are transmitting of receiving
a unique number associated with each memory location in a computer of other digital device
the production of artifactual, lower frequency components in a Doppler signal spectrum when the pulse repetition frequency of the Doppler instument is less than two times the maximum frequency of the Doppler sugnal.
amplitude mode display
maximum cyclical change in a quantity, such as the pressure in an ultrasound wave
amplitude reflection coeffient
the ratio of the reflected pressure amplitude (Pr) to the incident pressure amplitude (Pi) at an interface
analog-to-digital (A/D) converter
component or device that accepts analog signals, such as from a transducer of an amplifier, and converts these to a digital format for processing
a transducer array consisting of a number of ring-shaped piezoelectric elements arranged concentrically, along with a central disk. AN annular array can provide multiple transmit focal zones, dynamic receive focusing, and dynamic aperture. However, scanning must be done by mechanically sweeping the beam.
another name for the active radiating or receiving surface of a transducer
decreasing the relative excitation near the edges of the radiating surface of a transducer during transmission, or decreasing the relative sensitivity near the edge of the receiving surface of the transducer, in order to reduce side lobes.
in an ultrasound image or record any echo signal whose displayed position does not correspond to the actual position of the reflector in the body of whose displayed amplitude is not indicative of the reflecting or scattering properties of the region from which the echo originated
reduction in the amplitude and intensity of a sound wave as it propagates through a medium. Attenuation of ultrasound waves in tissue is caused by absorption and by scattering and reflection
the amount of attenuation per unit distance traveled by a wave; typical units are dB/cm
another name for a B-mode scanning instrument in which the sweep of the ultrasound beam is done, either mechanically or electronically, by the scan head. Real-time scanners are a type of auto scanner
minimum reflector spacing along the axis of an ultrasound beam that results in separate, distinguishable echoes on the display. The shorter the pulse duration, the better the axial resolution, that is, the closer the reflectors can be and be distinguished
base plus fog
a slight opacity of photographic of x-ray film, found upon developing without exposure
the directed ultrasound field produced by an ultrasound transducer
part of an imaging instrument that provides the pulse-delay sequences for transmit focusing and for dynamic receive focusing. The beam former also controls the beam direction for electronically scanned array.
a number consisting of a series of 0s and 1s to represent a quantity. Binary numbers are used in digital computers. They have 2 as a base, in contrast to the decimal number system which has 1 as its base.