Print Options

Card layout: ?

← Back to notecard set|Easy Notecards home page

Instructions for Side by Side Printing
  1. Print the notecards
  2. Fold each page in half along the solid vertical line
  3. Cut out the notecards by cutting along each horizontal dotted line
  4. Optional: Glue, tape or staple the ends of each notecard together
  1. Verify Front of pages is selected for Viewing and print the front of the notecards
  2. Select Back of pages for Viewing and print the back of the notecards
    NOTE: Since the back of the pages are printed in reverse order (last page is printed first), keep the pages in the same order as they were after Step 1. Also, be sure to feed the pages in the same direction as you did in Step 1.
  3. Cut out the notecards by cutting along each horizontal and vertical dotted line
To print: Ctrl+PPrint as a list

25 notecards = 7 pages (4 cards per page)

Viewing:

Unit 4- Safety

front 1

To help remain safe on the job, it is always recommended that field personnel

  • test fire extinguisher operation regularly.
  • test fire alarm operation before starting work.
  • be aware of all potential hazards around them.
  • work alone to help prevent careless accidents

back 1

Be aware of all potential hazards around them.

front 2

Which of the following represents three pieces of personal protective equipment (PPE)?

  • Ear plugs, ladders, safety gloves
  • Short-sleeved shirts, hard hats, work boots
  • Hard hats, earplugs, work boots
  • Back brace, safety glasses, plastic-banded watches

back 2

Hard hats, earplugs, work boots

front 3

Which of the following can happen to a full nitrogen cylinder if the top is broken off?

  • The tank can become airborne
  • There will be a loud bang
  • The nitrogen vapor will freeze
  • Nitrogen will slowly leak out

back 3

The tank can become airborne

front 4

Which of the following tasks could potentially subject a service technician to frostbite?

  • Connecting or removing a service hose from a suction-line service port
  • Connecting or removing a service hose from the inlet port on a vacuum pump
  • Connecting or removing a service hose from a discharge line service port
  • Connecting or removing a service hose from a liquid-line service port

back 4

Connecting or removing a service hose from a liquid-line service port

front 5

Which of the following statements is true regarding the use of nitrogen?

  • Nitrogen must only be added to fully charged HVACR systems.
  • The nitrogen tank must be outfitted with a pressure regulator.
  • Nitrogen must only be added to systems that are in a deep vacuum.
  • Dry nitrogen is a volatile gas that follows a pressure/temperature relationship.

back 5

The nitrogen tank must be outfitted with a pressure regulator.

front 6

What can happen when oil is mixed with oxygen under pressure?

  • The mixture will solidify
  • Methane gas will form
  • An explosion can occur
  • The ability of the oil to lubricate will increase

back 6

An explosion can occur

front 7

Which organ is most likely to be affected by electric shock?

  • Lungs
  • Liver
  • Kidneys
  • Heart

back 7

Heart

front 8

When electric current flows through the body, which of the following injuries will commonly result?

  • Burns and death
  • Death and hearing loss
  • Hearing loss and burns
  • Shocks and burns

back 8

Shocks and burns

front 9

Which of the following factors will most directly determine the severity of an electric shock?

  • The weight of the individual
  • Voltage that the individual is subjected to
  • Current flow through the individual
  • The height of the individual

back 9

Current flow through the individual

front 10

Which of the following statements is true regarding working on electrical circuits?

  • Ensure that the circuit power is on whenever working on electric circuits.
  • Be sure to use proper lock-out and tag-out procedures on all equipment.
  • Using aluminum ladders will protect individuals from electricity-related injuries.
  • Metallic jewelry reduces the possibility of receiving an electric shock.

back 10

  • Be sure to use proper lock-out and tag-out procedures on all equipment.

front 11

What can be done to prevent damaging the surroundings while soldering or brazing?

  • Use a lower-temperature torch
  • Apply extra flux to the joints
  • Use a heat shield
  • Properly clean all fittings

back 11

Use a heat shield

front 12

The ground wire on most systems is commonly color-coded

  • black.
  • white.
  • green.
  • red.

back 12

Green

front 13

A Class A fire extinguisher is to be used on which type of fire?

  • Chemical
  • Paper
  • Grease
  • Electrical

back 13

Paper

front 14

Which of the following refrigerant safety groups has the highest flammability and the highest toxicity?

  • A1
  • B3
  • B1
  • A3

back 14

B3

front 15

When lifting a heavy object by yourself, make certain that you

  • lift with your back.
  • avoid wearing gloves.
  • lift with your legs.
  • avoid wearing a back brace.

back 15

Lift with your legs.

front 16

Which of the following is the safest acceptable method for moving a piece of heavy equipment across a smooth, flat roof?

  • Pulling it
  • Carrying it by hand
  • Dragging it
  • Using pipe rollers

back 16

Using pipe rollers

front 17

What should be done before using chemicals to clean a dirty evaporator coil?

  • Smell the chemical to see if it burns
  • Spray a small amount of the chemical on your skin
  • Read the label on the chemical container
  • Turn off all exhaust and ventilation fans

back 17

Read the label on the chemical container

front 18

If a compressor motor experiences a burnout, which of the following can be produced?

  • Grease
  • Oil
  • Water
  • Acid

back 18

Acid

front 19

How far above the landing surface should an extension ladder extend?

  • 6 feet
  • 3 feet
  • 1/2 of the ladder’s working length
  • 1/4 of the ladder’s working length

back 19

3 feet

front 20

If an extension ladder is used to access the roof of a 10-foot high building, the base of the ladder should be approximately how many feet from the building?

  • 2.5 feet
  • 5 feet
  • 10 feet
  • 7.5 feet

back 20

2.5 feet

front 21

With respect to fire extinguishers, the acronym PASS stands for

  • Push, Adjust, Sweep, Squeeze
  • Pull, Aim, Sweep, Squeeze
  • Pull, Aim, Squeeze, Sweep
  • Push, Aim, Squeeze, Sweep

back 21

Pull, Aim, Squeeze, Sweep

front 22

When working around rotating machinery, which of the following is true?

  • Be sure to remove all protective shields while the equipment is operating.
  • Allow all rotating equipment to come to a complete stop before servicing.
  • Avoid wearing tight-fitting clothing when working on rotating equipment.
  • It is safe to stop rotating equipment with your hand if the power is off.

back 22

Allow all rotating equipment to come to a complete stop before servicing

front 23

All of the following are true regarding first aid except

  • first aid is intended to help relieve pain.
  • first aid is intended to help promote recovery.
  • first aid is intended to be administered only by trained professionals.
  • first aid is intended to help prevent injuries from getting worse.

back 23

First aid is intended to be administered only by trained professionals

front 24

A confined space can be defined as an area or place that

  • has an interior volume that is less than 1000 cubic feet.
  • is intended to accommodate no more than three people.
  • is enclosed on all sides with no access openings.
  • is not intended for human occupancy.

back 24

Is not intended for human occupancy

front 25

To prevent injury from leaking refrigerants, chemical vapors, or torch fumes, it is good field practice to

  • only use chemicals with low toxicities.
  • wear a dust mask whenever possible.
  • ensure adequate ventilation.
  • only work outdoors.

back 25

Ensure adequate ventilation