Print Options

Card layout: ?

← Back to notecard set|Easy Notecards home page

Instructions for Side by Side Printing
  1. Print the notecards
  2. Fold each page in half along the solid vertical line
  3. Cut out the notecards by cutting along each horizontal dotted line
  4. Optional: Glue, tape or staple the ends of each notecard together
  1. Verify Front of pages is selected for Viewing and print the front of the notecards
  2. Select Back of pages for Viewing and print the back of the notecards
    NOTE: Since the back of the pages are printed in reverse order (last page is printed first), keep the pages in the same order as they were after Step 1. Also, be sure to feed the pages in the same direction as you did in Step 1.
  3. Cut out the notecards by cutting along each horizontal and vertical dotted line
To print: Ctrl+PPrint as a list

15 notecards = 4 pages (4 cards per page)

Viewing:

lesson 10 b2

front 1

Which modifier, when held, enables you to mirror the outputs of a bus?

back 1

control

front 2

Which modifier, when held, enables you to show a send in Expanded Sends view?

back 2

command plus clicking the small arrow next to send

front 3

Why would the pan knob in the Output window be greyed out?

back 3

it is deactivated

front 4

What automation mode? - Automation will not be read

back 4

auto off

front 5

What automation mode? Automation will be read, but cannot be written

back 5

auto read

front 6

What automation mode? Automation will be written on all enabled parameters

back 6

auto write

front 7

What automation mode? Affected by AutoMatch time

back 7

auto touch

front 8

What automation mode? Touched parameters will continue writing when released

back 8

auto write

front 9

Describe what happens when you Clear Automation

back 9

removes any automation breakpoints that are in that selected area

front 10

Describe what happens when you Cut Automation

back 10

removes any automation breakpoints that are in that selected area but created new breakpoints at start and end of selected area

front 11

How do you know all member tracks are selected.

back 11

a dot icon is next to their name

front 12

Which kind of track can be converted to a Routing Folder track?

back 12

aux tracks

front 13

Holding the ______________________ key will enable you to move an active group's fader without moving other faders in that group.

back 13

control

front 14

True or False? When you Mute a Folder track (Basic or Routing Folder), all tracks within will be inaudible.

back 14

true

front 15

When should Dither be applied?

back 15

when you want to reduce bit-file size (for example going from 24 to 16-bit)