Print Options

Card layout: ?

← Back to notecard set|Easy Notecards home page

Instructions for Side by Side Printing
  1. Print the notecards
  2. Fold each page in half along the solid vertical line
  3. Cut out the notecards by cutting along each horizontal dotted line
  4. Optional: Glue, tape or staple the ends of each notecard together
  1. Verify Front of pages is selected for Viewing and print the front of the notecards
  2. Select Back of pages for Viewing and print the back of the notecards
    NOTE: Since the back of the pages are printed in reverse order (last page is printed first), keep the pages in the same order as they were after Step 1. Also, be sure to feed the pages in the same direction as you did in Step 1.
  3. Cut out the notecards by cutting along each horizontal and vertical dotted line
To print: Ctrl+PPrint as a list

10 notecards = 3 pages (4 cards per page)

Viewing:

PT101L4

front 1

True or False a location can be typed into the main counter field?

back 1

True

front 2

What shortcut to place playback cursor at beginning?

back 2

Simply pressing Return will place the playback cursor at the beginning.

front 3

Short cuts for edit tools - F5,F6,F7,F8

back 3

F5 will enable the zoomer tool, F6 will enable the Trim tool, F7 will enable the Selector tool, F8 will enable the Grabber tool

front 4

Describe the different scrolling options

back 4

Horizontal scrolling is the arrows going left to right at the bottom right of the pro tools session which will enable you to just move left and right of the tracks area. Vertical scrolling is the plus and minus sign at the bottom right of the session will enable you to move up and down of the tracks area. The scrolling with the mouse wheel will enable you to scroll up and down on the tracks area, but holding shift will allow you to move left to right.

front 5

What does insertion follows playback look like?

back 5

Dotted lines on the left side of the box with and arrow pointing towards a solid lined with a a bigger arrow just to the right of the solid line

front 6

What does the Trim, Selector, grabber, scrubber, and pencil tools do?

back 6

Trim tool allows to adjust boundaries of the clips in the session. The Selector tool allows for a click and drag selection method. The Grabber tool allows for a clip to be dragged along the tracks area.

front 7

What does dbl-clicking a clip with the selector tool do to the clip

back 7

Double clicking will select an entire clip

front 8

What position does the cursor of the smart tool have to be ing for it to be a grabber, trimer, or selector

back 8

Cursor be on the upper half of the track for the selector tool. Cursor be on the bottom half of the track for the grabber tool. Cursor be on either ends of the clips for the Trim tool

front 9

What does the Slip, Shuffle, Grid, and Spot tools do?

back 9

Slip allows the things in the tracks area to move smoothly and freely. Shuffle allows for perfect and exact alignment against other tracks in the tracks area with no gaps in between. Absolute grid allows the tracks to snap onto the grid lines that’s it is being sent to, and Relative grid allows the tracks to be aligned close to the grid align but instead going along an imaginary grid line based off of where the tracks began. Spot allows for the user to place a tracks very specifically along the timeline and beats by typing it in rather than dragging.

front 10

Name two types of grid mode

back 10

Absolute grid and Relative Grid