Print Options

Card layout: ?

← Back to notecard set|Easy Notecards home page

Instructions for Side by Side Printing
  1. Print the notecards
  2. Fold each page in half along the solid vertical line
  3. Cut out the notecards by cutting along each horizontal dotted line
  4. Optional: Glue, tape or staple the ends of each notecard together
  1. Verify Front of pages is selected for Viewing and print the front of the notecards
  2. Select Back of pages for Viewing and print the back of the notecards
    NOTE: Since the back of the pages are printed in reverse order (last page is printed first), keep the pages in the same order as they were after Step 1. Also, be sure to feed the pages in the same direction as you did in Step 1.
  3. Cut out the notecards by cutting along each horizontal and vertical dotted line
To print: Ctrl+PPrint as a list

10 notecards = 3 pages (4 cards per page)

Viewing:

into to sound mixing 4

front 1

True or False a location can be typed into the main counter field?

back 1

true

front 2

What shortcut to place playback cursor at beginning?

back 2

return / enter key

front 3

Short cuts for edit tools - F5,F6,F7,F8

back 3

f5, zoomer tool f6, trim tool, f7 selector tool, f8 grabber tool

front 4

Describe the different scrolling options

back 4

horizontal and vertical

front 5

What does insertion follows playback look like?

back 5

the playback is at the beginning of the session, sessions are played for exactly one minute, then you stop playback

front 6

What does the Trim, Selector, grabber, scrubber, and pencil tools do?

back 6

trim tool enables you to adjust the boundaries of clips in ur session. boundaries tool you can click and drag anywhere on a ruler. grabber tool allows you to click on a clip to move or drag it left or right. scrubber lets you listen to sound. pencil tools allows you to draw stuff.

front 7

What does dbl-clicking a clip with the selector tool do to the clip

back 7

it will select the entire clip

front 8

What position does the cursor of the smart tool have to be ing for it to be a grabber, trimer, or selector

back 8

grabber, if your cursor is in the bottom half of the track the active tool is the grabber tool.

selector, if your cursor is in the upper half of a track the active tool is the selective tool

trimer. if your cursor is at either end of a clip the active tool is the trim tool.

front 9

What does the Slip, Shuffle, Grid, and Spot tools do?

back 9

slip mode allows your tools to move smoothly and freely, shuffle mode makes sure the clips are aligned with no gaps, grid

front 10

Name two types of grid mode

back 10

relative grid mode, absolute grid mode.