Print Options

Card layout: ?

← Back to notecard set|Easy Notecards home page

Instructions for Side by Side Printing
  1. Print the notecards
  2. Fold each page in half along the solid vertical line
  3. Cut out the notecards by cutting along each horizontal dotted line
  4. Optional: Glue, tape or staple the ends of each notecard together
  1. Verify Front of pages is selected for Viewing and print the front of the notecards
  2. Select Back of pages for Viewing and print the back of the notecards
    NOTE: Since the back of the pages are printed in reverse order (last page is printed first), keep the pages in the same order as they were after Step 1. Also, be sure to feed the pages in the same direction as you did in Step 1.
  3. Cut out the notecards by cutting along each horizontal and vertical dotted line
To print: Ctrl+PPrint as a list

15 notecards = 4 pages (4 cards per page)

Viewing:

Unit 2 Lesson 10

front 1

Which modifier, when held, enables you to mirror the outputs of a bus?

back 1

Control

front 2

Which modifier, when held, enables you to show a send in Expanded Sends view?

back 2

Command

front 3

Why would the pan knob in the Output window be greyed out?

back 3

FMP is enabled

front 4

What automation mode? - Automation will not be read

back 4

Off

front 5

What automation mode? Automation will be read, but cannot be written

back 5

Read

front 6

What automation mode? Automation will be written on all enabled parameters

back 6

Write

front 7

What automation mode? Affected by AutoMatch time

back 7

Latch

front 8

What automation mode? Touched parameters will continue writing when released

back 8

Touch

front 9

Describe what happens when you Clear Automation

back 9

Removes all automation data

front 10

Describe what happens when you Cut Automation

back 10

Breakpoints are created at the beginning and end of the cut area

front 11

How do you know all member tracks are selected.

back 11

Circle

front 12

Which kind of track can be converted to a Routing Folder track?

back 12

Aux

front 13

Holding the ______________________ key will enable you to move an active group's fader without moving other faders in that group.

back 13

Shift

front 14

True or False? When you Mute a Folder track (Basic or Routing Folder), all tracks within will be inaudible.

back 14

True

front 15

When should Dither be applied?

back 15

When you reduce bit depth