Print Options

Card layout: ?

← Back to notecard set|Easy Notecards home page

Instructions for Side by Side Printing
  1. Print the notecards
  2. Fold each page in half along the solid vertical line
  3. Cut out the notecards by cutting along each horizontal dotted line
  4. Optional: Glue, tape or staple the ends of each notecard together
  1. Verify Front of pages is selected for Viewing and print the front of the notecards
  2. Select Back of pages for Viewing and print the back of the notecards
    NOTE: Since the back of the pages are printed in reverse order (last page is printed first), keep the pages in the same order as they were after Step 1. Also, be sure to feed the pages in the same direction as you did in Step 1.
  3. Cut out the notecards by cutting along each horizontal and vertical dotted line
To print: Ctrl+PPrint as a list

16 notecards = 4 pages (4 cards per page)

Viewing:

NOPPPEE 1112

front 1

True or False? The playback engine affects the Hardware Buffer setting for audio tracks that are not record-enabled.

back 1

False

front 2

What is the disk playback cache size that is dynamically managed by Pro Tools?

back 2

Normal

front 3

What disk playback cache size is when audio is copied into RAM for playback?

back 3

Fixed

front 4

What displays the total CPU and individual processor usage in the systems usage window?

back 4

CPU

front 5

What only appears when a fixed playback cache size is used in the systems usage window?

back 5

Disk Meter

front 6

What displays the amount of RAM used by Pro Tools in the systems usage window?

back 6

Memory Meter

front 7

What happens when all of the session's audio has been copied to RAM?

back 7

Disk Cache will be Green

front 8

What CAN NOT be changed in the session setup window?

back 8

Sample Rate

front 9

The shortcut to create a new input path in the I/O setup dialog box is…

back 9

Command+N

front 10

How can you tell if an output path is ACTIVE in the I/O setup dialog box?

back 10

Green Check mark

front 11

Describe what an audition path is.

back 11

used for previewing audio from the Workspace browser, Clip List, and AudioSuite plug-in window.

front 12

Are all track outputs busses?

back 12

Yes

front 13

In the I/O setup dialog box, how do you know if a path is selected?

back 13

its highlighted

front 14

In the I/O setup dialog box, how do you know if the bus has a sub path?

back 14

it will have an arrow

front 15

In the I/O setup dialog box,how do you know if the bus is an output bus?

back 15

It has info in "the Mapping to Output" column

front 16

T/F - I/O settings can be directly imported from one session file into another.

back 16

True