1 - How can you sign in to your Avid Master Account when starting work in Pro Tools? What is required to sign in to your account?
Push the sign in button at top right corner
Avid account username and password
1- Why is it important to select the audio interface you want to use prior to creating or opening a session? What dialog box can you use for this purpose?
So the I/O settings match
Playback engine
1 - What is the H/W Buffer Size setting in the Playback Engine dialog box used for? What kinds of tracks are affected by this setting?
Determines the number of samples from audio interface to the CPU
ones with Low latency to include record enabled tracks and/or receiving live input
1 - What dialog box can you use to configure the available options for your connected audio interface?
Hardware set up dialog box
1 - How can you specify the I/O settings that Pro Tools will use when creating a new session from the Dashboard?
I/O settings pop up menu
1 - Where are changes to Pro Tools I/O settings saved? Are they stored in the session or on the system?
Last Used
Everything but the bus are system settings
bus are session settings
1 - What dialog box can you use to rename signal paths?
I/O set up dialog box
1- How can you configure an audition path in Pro Tools?
Setup>I/O
Output tab
Audition Path
1 - What are some ways to open a recently used project or session on a system?
File> Open Recent
File > create new - and open in dashboard under recent
File>Open projects - and open in dashboard under recent
1 - What shortcut operation can you use to add an individual Audio track to your session?
CTRL -DBL CLICK
1 - What options are available for changing the display of the Mix and Edit windows? What are some of the optional views available in each window?
View selectors and track width
Inserts, sends, I/O, comments, Instruments, HEAT, Track color
1 - How can you easily show or hide tracks in Pro Tools? What is the difference between hiding a track and deleting a track?
Click on the circle in the tracks list.
Hiding it still plays the material on the track, deleting will not have the material playing
1 - What are some options available in the Track List pop-up menu?
Show all , show only....
hide all, hide only...
restore all tracks
2-What are some of the features enabled by Pro Tools | Ultimate software?
Full surround sound
More automation
Video Editing features
2-What is required to import and arrange multiple video clips on a Video track?
You need Pro Tools Ultimate
2-Name some areas of focus available for Workspace browsers in Pro Tools.
Sound Libraries
volumes
session
track presets
Catalogs
user
2-What are some of the functions that you can perform using a Workspace browser?
access, view, search your drive
Designate the function of each drive
View, audition, manage, import from drive
Locate and open a session
2-How can you audition files from a browser? How can you audition them in context with your session?
click on file and press spacebar
click on file and push the preview button( arrow)
play botton to left of waveform
click anywhere on the waveform
- enable audio conforms to session tempo button(metronome) push 0 on numeric keyborad and then start the clip by one of the methods above
2-What is Soundbase? What are tags in Soundbase?
A browser window that allows you to search using tags
A way to search for audio files using keywords
2-What are some available destinations when importing audio from a Workspace browser or Soundbase?
timeline, track, track list, clips list
2-What are some of the different types of media you can import into Pro Tools (in addition to audio files)?
audio, midi, video
2-What command allows you to import entire tracks from another Pro Tools session into your current session?
Alt+shift+i
2-What types of clips can be grouped together as a clip group? Can clips of different types be combined into a single clip group?
audio, MIDI, video
Yes
2-How many clips are required for a clip group? Can clip groups contain silence?
no minimum(1)
Yes
2-What kind of icon is used to indicate a clip group? Where is the icon located?
bottom left corner of the clip
2-What do the Ungroup and Ungroup All commands do? How would you go about reassembling a clip group after using one of these command?
Ungroup - undo's one level of the group
Ungroup all - undoes all levels of grouping
select Clip> regroup or Ctrl+alt+R
3 -What menu would you use to display Conductor rulers, such as Meter and Tempo? How can you display rulers without using a main menu?
View>Rulers
Ruler View selector
3 - What are the default tempo and meter for all Pro Tools sessions?
120
4/4
3 - What modifier key would you hold while clicking on a ruler to add a Meter or Tempo change to your session?
Start key
3 - What main menu provides access to the Tempo Operations window? What is the purpose of the Linear page in the Tempo Operations window?
Event Menu
To create tempos that change evenly over a set amount of time
3 - How can you configure Pro Tools to use a virtual instrument as the sound source for the metronome click? How can you control what notes are played for the accented and unaccented beats?
Setup> Click/Count Off or dbl click met button
In the click/Countoff options dialog box
3 - Describe at least three different ways to make a selection for recording.
Click on clip
Make a selection during playback
Use the in and out arrows
By memory locations
3 - Describe three ways to set the pre- and post-roll values. What modifier do you use to set pre- and post-roll by clicking in a track playlist?
In transport window - Type it in
Alt click in track playlist
In timebase ruler by dragging flags
You can enable and disable from options menu
3 - What keyboard shortcut can you use to toggle Pre/Post Roll on and off?
ctrl + K
3 - What are alternate playlists in Pro Tools? How can playlists be useful when recording multiple takes?
alternate takes
They are good so that you can go back and choose the best later
3 - When might you use the Pro Tools Preferences setting called Send Fully Overlapped Clips to Available Playlist While Recording? How can you ensure that the original audio gets moved to a playlist when rerecording just a section of the original using this setting?
When you want to keep every take
Edit>separate clip
3 - What are some differences in the way audio and MIDI clips are created when loop recording? How would you go about enabling loop recording for audio or MIDI?
- Audio: Single file contains all takes; individual takes separated as subset clips.
- Audio: If pass is interrupted before midpoint, entire take is discarded
- MIDI: New clips created for each take; if no input is received, no clip is created
- MIDI: If pass is interrupted before midpoint, entire clip is retained
1.Select Options > Loop Record
2.Record-enable the track
3.Select Options > Link Timeline and Edit Selection
4.Make selection
5.Enable Pre-Roll if desired
6.Click Record and Play
7.Record desired takes; stop playback before mid-point to discard last partial take
3 - What Preferences setting do you need to use to enable automatic playlist creation when Loop Recording?
3.Enable checkbox for Automatically Create New Playlists When Loop Recording
3 - How can you cycle through alternate takes from playlists? How can you audition takes from playlists while cycling though them?
–Press Command+Shift+Up Arrow (Mac) or Ctrl+Shift+Up Arrow (Windows) to cycle in material from previous playlist
–Press Command+Shift+Down Arrow (Mac) or Ctrl+Shift+Down Arrow (Windows) to cycle in material from next playlist
3 - What is the purpose of MIDI Merge mode? How can you perform a MIDI Merge recording while looping?
To allow you to record on top of previous material. This is good for making drum beats
1.Disable Options > Loop Record
2.Enable Loop Playback
- Choose Options > Loop Playback or
- Press Command+Shift+L (Mac) or Ctrl+Shift+L (Windows) or
- Press [4] on the Numeric Keypad
3.Enable MIDI Merge in the MIDI Controls
4.Record-enable a MIDI or Instrument track
5.Record-arm the Transport and press Play
6.Complete multiple passes, adding MIDI notes with each pass
4-What timebase do Audio Tracks default to? MIDI Tracks? Instrument Tracks?
Audio - Sample
MIDI/Instrument - Tick
4-Which Pro Tools timescales are absolute? Which are relative? What is the difference between absolute and relative timescales?
Absolute - Sample, Mins/Secs, Timecode, Feet/Frame
Relative - Bars/Beats
Absolute specific duration regardless of tempo; Relative durations change relative to tempo
4-How do audio clips respond to tempo changes on a sample-based track? How do they respond if you change the track to tick-based (without using Elastic Audio)?
They don't respond
The start of the clip becomes fixed and they will move to correspond with the sample based timeline.
4-Pro Tools provides 960 ticks per quarter note; how many ticks does it provide per half note? How many per eighth note?
1920
480
4-Why might you want to render a MIDI performance to audio? What are some available options for rendering a virtual instrument’s output to an audio file?
To enable audio editing and processing or to conserve processing resources
Drag&Drop or Track Freeze
4-What are some of the different options available for viewing data on MIDI and Instrument tracks in the Edit window? What kinds of operations can you perform in each view?
Clips - Edit functions
Notes - Change note frequency and duration
Velocity - Change note loudness
4-Where are the MIDI input and output controls located for MIDI tracks in the Mix window? Where are they located for Instrument tracks?
In the instruments view at the top of the track
In the I/O section
4-What does the MIDI Thru option do? How is it enabled?
Allows data to travel through a track to its MIDI output.
In the options menu
4-What is the Default Thru Instrument setting used for? How can you change the Default Thru Instrument setting?
Forces all virtual instruments to operate in a low latency domain
SETUP>PREF> MIDI tab
4-What keyboard modifier would you use when clicking on a MIDI clip in the Clip List to audition it? What is required for this process to play sound?
Option Click
The Default thry instument need to be set at FOLLOWS FIRST SELECTED MIDI TRACK
4-How is editing MIDI data different from editing audio? How are MIDI notes affected when deleting a selection or trimming a clip compared to how audio waveforms are affected?
When you delete/trim the start of MIDI note it will erase the whole note.
If you delete/trim the end of the clip the note may overhang if the entire note is not selected
4-What are some of the functions of the Pencil tool when editing MIDI notes?
select note, delete note, add note, trim note, move note - Basically turns into a smart tool
4-What setting normally determines the Default Note Duration when adding notes with the Pencil tool? How can this setting be changed?
The current grid value
In toolbar in edit window
4-How can you select a range of MIDI notes using the on-screen keyboard?
SHIFT + left or right arrows
4-What process can be used to transpose MIDI notes? What modifier can you use to transpose a selection up or down by an octave at a time?
select the note and push up or down arrows
SHIFT + arrows
4-How can you edit MIDI note velocities from the computer keyboard?
Push Command and arrows
4-Describe some different ways of deleting notes on a MIDI or Instrument track. What track views allow you to delete notes?
EDIT>CLEAR
use pencil tool plus ALT
select note with grabber or pencil and push delete or double click
Notes view