Loading Notecards...

VLANs

start over shuffle cards

ALL Cards

2/24

Both Sides

Commands to configure a port as a Trunk Port

Sw(config-if)#switchport mode trunk

Sw(config-if)#switchport trunk encapsulation dot1q**

Sw(config-if)#switchport trunk allowed vlan [vlan number]

Sw(config-if)#switchport trunk native vlan [vlan number]

** Newer devices only use 802.1q. Therefore, the encapsulation command is neither necessary nor accepted on newer devices (like 2960 switches).

MARK this card

Cards marked: 0